Savant PAV-SIPA50SMV2-05 IP Audio 50 V2 with Music 2.0
PAV-SIPA50SMV2-05
IP Audio 50 V2 with Music 2.0
SKU
174065
MPN:
PAV-SIPA50SMV2-05
- 6 Zones of Audio Switching
- 4 Zones at 50 Watts Per Channel
- 2 Zones of Pre-amp Output
- 4 Audio Inputs (2 Analog, 2 Digital)
Overview
This corner stone of the IP audio suite is a go to for distributed audio application supporting 4 zones of 50W/ch 1 zone of RCA stereo out for connection to a higher powered amp and 1 optical out for use in zones with an AVR. This all-in-one package features built-in amplification, distribution, control, and a music server containing a single stream of Savant Music.
Features
- Enables 6 zones of audio switching: 4 zones of amplification at 50 watts per channel and 2 zones of pre-amp output (1 RCA and 1 Digital TosLink).
- 4 Audio inputs (2 analog, 2 digital)
- 4 IR ports
- 2 RS-232 ports
- Combine units with an AVBÂ switch for expansion to meet any job
- 4 units with a Smart Host provides 18 total zones (16 amplified, 8 pre-amp) and 4 built in streams of Savant Music
- 16 units with a Pro Host provides 96 total zones (64 amplified, 32 pre amp) and 16 built in streams of Savant Music
- Flexible installation with options for rack, structured media, and credenza mounting
Specifications
| Model | PAV-SIPA50SM / PAV-SIPA50SMV2 | ||||
| Product Type | Savant® IP Audio 50 with Savant Music | ||||
| Audio Zones | 4 Speaker Output Zones | ||||
| Rack Space | 2U | ||||
| Audio Performance | |||||
|---|---|---|---|---|---|
| Rated Speaker Output | 50 WPC at 8 Ω (THD+N < 0.1%) 70 WPC at 8 Ω (THD+N < 1.0%) |
||||
| Compatible Speaker Impedance | 4 Ω or 8 Ω | ||||
| Frequency Response | 20 Hz – 20 kHz ±0.5 dB, Speaker Output | ||||
| Signal-to-Noise Ratio (SNR) | >95 dB, Speaker Output | ||||
| Supported Digital Input Formats | 44.1 kHz / 48 kHz / 96 kHz at 16-bit / 20-bit / 24-bit Resolution | ||||
| Audio Inputs & Outputs | |||||
| Speaker Outputs | 4 Zones; each zone uses a 4-pin Speaker Connector | ||||
| Maximum Speaker Wire Size | Up to 12 AWG | ||||
| Analog Stereo Inputs | 2× RCA Stereo Line-Level Inputs (Left & Right) | ||||
| Analog Input Impedance | 22 kΩ | ||||
| Analog Preamp Output | 1× Analog Stereo Line Output (Left & Right) | ||||
| Analog Preamp Output Level | Direct Line Level, 2.1 VRMS | ||||
| Digital Audio Inputs | 2× TOSLINK Optical Inputs | ||||
| Digital Audio Input Support | Up to 96 kHz / 24-bit PCM Stereo | ||||
| Digital Audio Output | 1× TOSLINK Optical Preamp Output | ||||
| Digital Audio Output Format | 96 kHz / 24-bit Line-Level Output, Fixed Volume | ||||
| Networking | |||||
| Ethernet | 1× 8-pin RJ-45, 100 Base-T Auto-Negotiating Port | ||||
| Audio Video Bridging (AVB) | Supported | ||||
| Supported Networking Standards | IEEE 802.1 AVB/TSN Switches IEEE 802.3 Ethernet |
||||
| Ethernet Activity LED | Green Blinking: Activity (Rx/Tx) Off: No Activity |
||||
| Ethernet Link LED | Green Solid: Ethernet Link Established Off: Ethernet Link Not Established |
||||
| Savant Music & Expansion | |||||
| Savant Music | Built-in Single Stream of Savant Music | ||||
| Streaming Services | Provides access to supported popular music streaming services; streaming service fees may apply | ||||
| System Expansion | Up to 16 Savant IP Audio Devices Can Be Connected in a Single System to Create a Virtual Audio Switch | ||||
| Control & Integration | |||||
| IR Ports | 4× IR Ports | ||||
| IR Connection | 4-pin IR Connectors | ||||
| IR Emitter Compatibility | 5V Tolerant IR Flashers | ||||
| Maximum IR Emitter Distance | 15 ft (4.6 m) from Controller | ||||
| RS-232 | 1× 8-pin RJ-45 Serial Port | ||||
| RS-232 Function | Transmit and Receive Serial Binary Data to and from Serial-Controllable Devices | ||||
| RS-232 Flow Control | CTS/RTS Handshaking Supported Based on Component Profile | ||||
| RS-422 / RS-485 | Not Supported | ||||
| USB | USB 2.0 Type-A; Reserved for Future Use | ||||
| RS-232 Pinout | |||||
| Pin 1 | No Connection | ||||
| Pin 2 | No Connection | ||||
| Pin 3 | No Connection | ||||
| Pin 4 | Ground (GND) | ||||
| Pin 5 | Receive (RXD) | ||||
| Pin 6 | Transmit (TXD) | ||||
| Pin 7 | Clear to Send (CTS) | ||||
| Pin 8 | Request to Send (RTS) | ||||
| Speaker Connector Pinout | |||||
| Pin 1 | Right – | ||||
| Pin 2 | Right + | ||||
| Pin 3 | Left – | ||||
| Pin 4 | Left + | ||||
| Power | |||||
| Input Power | 100/240V AC, 50/60 Hz, 3.6A | ||||
| Maximum Power | 225W | ||||
| Fuse | 250V, 3.0A Slow-Blow Fuse; Field Replaceable | ||||
| Rear Power Switch | I (On): Powers On Chassis O (Off): Powers Off Chassis |
||||
| Environmental | |||||
| Operating Temperature | 32°F to 104°F (0°C to 40°C) | ||||
| Operating Humidity | 10% to 80% Relative Humidity, Non-Condensing | ||||
| Maximum BTU | 750 BTU/hr | ||||
| Dimensions & Weight | |||||
| Device Dimensions (H × W × D) | 3.03" × 12.00" × 14.17" (7.69 × 30.5 × 36.0 cm) | ||||
| Device Weight | 10.6 lb (4.81 kg) | ||||
| Shipping Dimensions (H × W × D) | 8.27" × 15.55" × 19.41" (21.0 × 39.5 × 49.3 cm) | ||||
| Shipping Weight | 15.1 lb (6.83 kg) | ||||
| Installation | |||||
| Rack Installation | Compatible with Standard 19" NEMA Rack Mounts; Requires Included 2U Rack Bracket | ||||
| Structured Media Enclosure Installation | Supported Using Included Enclosure Brackets; Louvered Enclosure Doors Recommended for Proper Ventilation | ||||
| Front Panel Indicators & Controls | |||||
| Power LED | Green: System Powered and Operating Normally Red: System in Standby Mode Off: System Not Receiving Power |
||||
| Status LED | Green Blinking: System Ready, No Host Communication Green: Host Communication Established Red Blinking: Firmware Running, No DHCP IP Address Red: Firmware Update Problem / Reset Pending Amber Blinking: Valid Link-Local IP Address and Connecting to Host Amber: Firmware Update in Progress Off: Embedded Processor Resetting or Booting |
||||
| Hardware Failure Indication | Status LED Indication Is Interrupted Every Three Seconds with a Solid Red Indication | ||||
| RS-232 LED | Green: RS-232 Activity Off: No RS-232 Activity |
||||
| IR LED | Green: IR Port Signal Activity Off: No IR Activity |
||||
| Zone Protection LED | Red: Protection Mode Enabled for a Zone/Channel, Typically Due to Thermal Protection, Clipping, or Overcurrent Off: Zone Off and Protection Mode Not Enabled |
||||
| On/Off Button | Hold Approximately 5 Seconds to Enter Standby Mode; Hold Approximately 1 Second to Exit Standby Mode | ||||
| Reset Button | Resets Network; Hold for 5 Seconds While Powered On to Clear Network Settings | ||||
| Regulatory | |||||
| Safety & Emissions | FCC Part 15B, CE Mark, C-Tick, UL, UKCA | ||||
| RoHS | Compliant | ||||
| Supported Releases | |||||
| PAV-SIPA50SM-xx | da Vinci 8.8 and Higher | ||||
| PAV-SIPA50SMV2-xx | da Vinci 9.4.2 and Higher | ||||
| Box Contents | |||||
| Savant IP Audio 50 | 1× PAV-SIPA50SM-xx / PAV-SIPA50SMV2-xx | ||||
| Enclosure Brackets | 2× 071-1103-xx | ||||
| 2U Rack Bracket | 1× 071-1102-xx | ||||
| Power Cord | 1× 064-0079-xx | ||||
| #10 × ½" Screws | 4× 039-0405-xx | ||||
| Push Rivets | 4× 039-0406-xx | ||||
| M4 Screws | 6× 039-0403-xx | ||||
| 4-pin Speaker Connectors | 4× 028-0702-xx | ||||
| 4-pin IR Connectors | 2× 028-0703-xx | ||||
| Rubber Feet | 4× 074-0655-xx | ||||
| M3 Feet Screws | 4× 039-0407-xx | ||||
| Product Regulatory Statement | 1× 009-1950-xx | ||||