Savant PAV-SIPA125SM-10 IP Audio 125 with Music 2.0
PAV-SIPA125SM-10
IP Audio 125 with Music 2.0
SKU
174407
MPN:
PAV-SIPA125SM-10
- Enables 6 zones of audio switching
- 4 Zones at 125 Watts per Channel
- 4 Audio inputs (2 Analog 2 Digital)
- Built-in Stream of Savant Music 2.0
Overview
This all-in-one package features built-in amplification, distribution, control, and a music server containing a single stream of Savant Music 2.0.
Features
- Enables 6 zones of audio switching: 4 zones of amplification at 125 watts per channel and 2 zones of pre-amp output (1 RCA and 1 Digital TosLink).
- 4 Audio inputs (2 analog, 2 digital)
- 4 IR ports
- 2 RS-232 ports
- Combine units with an AVB switch for expansion to meet any job
- 4 units with a Smart Host provides 18 total zones (16 amplified, 8 pre-amp) and 4 built in streams of Savant Music
- 16 units with a Pro Host provides 96 total zones (64 amplified, 32 pre amp) and 16 built in streams of Savant Music
- Includes ears for rack mounting in 2U space.
Specifications
| Model | PAV-SIPA125SM | ||||
| Product Type | Savant® IP Audio 125 with Savant Music | ||||
| Audio Zones | 4 Speaker Output Zones | ||||
| Rack Space | 2U | ||||
| Audio Performance | |||||
|---|---|---|---|---|---|
| Rated Power | 125 WPC at 8 Ω (THD+N < 0.1%) | ||||
| Compatible Speaker Impedance | 4 Ω or 8 Ω | ||||
| Frequency Response | 20 Hz – 20 kHz ±0.5 dB, Speaker Output | ||||
| Signal-to-Noise Ratio (SNR) | >100 dB, Speaker Output | ||||
| Supported Digital Input Formats | 44.1 kHz / 48 kHz / 96 kHz at 16-bit / 20-bit / 24-bit Resolution | ||||
| Audio Inputs & Outputs | |||||
| Speaker Outputs | 4 Zones; Uses 4-pin Speaker Connectors | ||||
| Maximum Speaker Wire Size | Up to 12 AWG | ||||
| Digital Audio Output | 1× TOSLINK Optical Preamp Output | ||||
| Digital Audio Output Format | 96 kHz / 24-bit Line-Level Output, Fixed Volume | ||||
| Digital Audio Inputs | 2× TOSLINK Optical Inputs | ||||
| Digital Audio Input Support | Up to 96 kHz / 24-bit Digital Audio; PCM Stereo Only | ||||
| Analog Preamp Output | 1× Analog Stereo Line Output (Left & Right) | ||||
| Analog Preamp Output Level | Direct Line Level, 2.1 VRMS | ||||
| Analog Audio Inputs | 2× RCA Stereo Line-Level Inputs (Left & Right) | ||||
| Analog Input Impedance | 22 kΩ | ||||
| Savant Music & Expansion | |||||
| Savant Music | Built-in Single Stream of Savant Music | ||||
| Streaming Services | Supports Savant Music Streaming Services; Streaming Service Fees May Apply | ||||
| System Expansion | Multiple Savant IP Audio Devices Can Be Connected in a Single System to Create a Virtual Audio Switch; Maximum AVB Device Count Depends on the Active da Vinci Version and Host Type | ||||
| Networking | |||||
| Ethernet | 1× 8-pin RJ-45, 10/100/1000 Base-T Auto-Negotiating Port | ||||
| Audio Video Bridging (AVB) | Supported | ||||
| Ethernet Activity LED | Green Blinking: Activity (Rx/Tx) Off: No Activity |
||||
| Ethernet Link LED | Green Solid: Ethernet Link Established Off: Ethernet Link Not Established |
||||
| Network Requirements | All Savant Devices Should Be Connected to the Same LAN or Subnet as the Host. Savant Recommends Against Traffic or Packet Shaping for Savant Devices. | ||||
| Control & Integration | |||||
| IR Ports | 6× IR Ports | ||||
| IR Connection | 6-pin IR Connectors | ||||
| IR Emitter Compatibility | 5V-Tolerant IR Flashers | ||||
| Maximum IR Emitter Distance | 15 ft (4.6 m) from Controller | ||||
| Relay | 1× 3-pin Control Connector; Normally Open (NO), Common (C), Normally Closed (NC) | ||||
| Relay Maximum | 30V DC, 1A | ||||
| GPIO | General Purpose Input/Output via 3-pin Control Connector | ||||
| GPIO Input | Low: <0.8V DC High: >2.4V DC Minimum: 0V DC Maximum: 12V DC |
||||
| GPIO Output | Binary 0–12V DC Output, 150mA Maximum | ||||
| GPIO Pull-Down | 1 kΩ Pull-Down Resistor to Signal Ground | ||||
| RS-232 Ports | 2× 8-pin RJ-45 Serial Ports | ||||
| RS-232 Function | Transmit and Receive Serial Binary Data to and from Serial-Controllable Devices | ||||
| RS-232 Flow Control | CTS/RTS Handshaking Supported Based on Component Profile | ||||
| RS-422 / RS-485 | Not Supported | ||||
| USB | USB 2.0 Type-A; Reserved for Future Use | ||||
| Speaker Connector Pinout | |||||
| Pin 1 | Right – | ||||
| Pin 2 | Right + | ||||
| Pin 3 | Left – | ||||
| Pin 4 | Left + | ||||
| RS-232 Pinout | |||||
| Pin 1 | No Connection | ||||
| Pin 2 | No Connection | ||||
| Pin 3 | No Connection | ||||
| Pin 4 | Ground (GND) | ||||
| Pin 5 | Receive (RXD) | ||||
| Pin 6 | Transmit (TXD) | ||||
| Pin 7 | Clear to Send (CTS) | ||||
| Pin 8 | Request to Send (RTS) | ||||
| IR Connector Pinout | |||||
| Pin 1 | IR 1 – | ||||
| Pin 2 | IR 1 + | ||||
| Pin 3 | IR 2 – | ||||
| Pin 4 | IR 2 + | ||||
| Pin 5 | IR 3 – | ||||
| Pin 6 | IR 3 + | ||||
| Relay & GPIO Pinout | |||||
| Relay Pin 1 | Normally Closed (NC) | ||||
| Relay Pin 2 | Common (C) | ||||
| Relay Pin 3 | Normally Open (NO) | ||||
| GPIO Pin 1 | Ground | ||||
| GPIO Pin 2 | GPIO | ||||
| GPIO Pin 3 | Pull-Down Jumper | ||||
| Power | |||||
| Input Power | 100/240V AC, 50/60 Hz, 10A | ||||
| Maximum Power | 515W | ||||
| Fuse | 250V, 10A Slow-Blow Fuse; Field Replaceable | ||||
| Rear Power Switch | I (On): Powers On Chassis O (Off): Powers Off Chassis |
||||
| Environmental | |||||
| Operating Temperature | 32°F to 104°F (0°C to 40°C) | ||||
| Operating Humidity | 10% to 90% Relative Humidity, Non-Condensing | ||||
| Maximum BTU | 1750 BTU/hr | ||||
| Dimensions & Weight | |||||
| Device Dimensions (H × W × D) | 3.46" × 17.30" × 14.24" (8.79 × 43.94 × 36.18 cm) | ||||
| Device Weight | 14.4 lb (6.5 kg) | ||||
| Shipping Dimensions (H × W × D) | 7.5" × 24.0" × 19.0" (19.05 × 60.96 × 48.26 cm) | ||||
| Shipping Weight | 18.5 lb (8.4 kg) | ||||
| Width with Mounting Brackets | Add 1.70" Total to Device Width (0.85" per Side) | ||||
| Front Panel Indicators & Controls | |||||
| Reset Button | Hold for 5 Seconds While Powered On to Clear Network Settings | ||||
| On/Off Button | Hold Approximately 5 Seconds to Enter Standby Mode; Hold Approximately 1 Second to Exit Standby Mode | ||||
| Power LED | Green: System Powered and Operating Normally Red: System in Standby Mode Off: System Not Receiving Power |
||||
| Status LED | Green Blinking: System Ready, No Host Communication Green: Host Communication Established Red Blinking: Firmware Running, No DHCP IP Address Red: Firmware Update Problem / Reset Pending Amber Blinking: Valid Link-Local IP Address and Connecting to Host Amber: Firmware Update in Progress Off: Embedded Processor Resetting or Booting |
||||
| Hardware Failure Indication | Status LED Is Interrupted Every Three Seconds with a Solid Red Indication | ||||
| Relay LED | Green: Relay Port Activity Off: No Relay Port Activity |
||||
| GPIO LED | Green: GPIO Port Activity Off: No GPIO Port Activity |
||||
| Zone Status | Green: Zone in Use Red: Protection Mode Enabled, Typically Due to Thermal Protection, Clipping, or Overcurrent Off: Zone Off and Protection Mode Not Enabled |
||||
| Regulatory | |||||
| Safety & Emissions | FCC Part 15B, CE Mark, C-Tick, UL, UKCA | ||||
| RoHS | Compliant | ||||
| Supported Releases | |||||
| PAV-SIPA125SM-00 / PAV-SIPA125SM-05 | da Vinci 9.0.2; Enhanced DSP Function Requires da Vinci 9.1 or Higher | ||||
| PAV-SIPA125SM-10 | da Vinci 9.4.2 or Higher | ||||
| Box Contents | |||||
| IP Audio 125 | 1× PAV-SIPA125SM-xx | ||||
| Install Kit | 1× 075-0202-xx | ||||
| Power Cord | 1× 064-0431-xx | ||||
| 2U Chassis Mounting Ears | 2× 071-0113-xx | ||||
| M5 × 12 mm Screws | 4× 039-0034-xx | ||||
| 4-pin Speaker Connectors | 4× 028-0702-xx | ||||
| 6-pin Control Connectors | 2× 028-0664-xx | ||||
| 3-pin Control Connectors | 2× 028-0665-xx | ||||
| Product Information and Regulatory Statement | 1× 009-1950-xx | ||||
Support
Manuals & Technical Documents
SpecificationSavant-PAV-SIPA125SM-10-Spec Sheet.pdf